A new SMT Soldering Material is Solder paste. The Solder paste manufacturer produces it so that it is viscous at room temperature and can hold components in the correct position; during soldering it bonds the components tightly to the PCB so they are not easily separated.
The component used with this adhesive material is the syringe. Whether on an automatic or manual dispensing machine, the syringe is an indispensable accessory. JJY shares with its partners the basic use of syringes for Solder paste.
It is mainly used for soldering SMT circuit boards, and also for soldering the pins of major components, where a reliable soldered joint is required.
Solder Paste is mainly stored in a low-temperature environment. When in use, clean any oil or residue from the component surfaces. Apply the solder paste to the spot where bonding is needed, then place the component precisely on that spot. Put it in the reflow oven at a suitable temperature for soldering. The coated components can be soldered within about 5 minutes in the reflow oven, and the joint also conducts electricity.
When the syringe wall is scratched or dirty, bubbles and incomplete dispensing can occur during solder paste dispensing. If you have any other questions about solder paste, partners are welcome to consult Shenzhen Jiajin Qianyuan Industrial Technology Co., LTD; let's learn and grow together!
Related Articles
- How to select solder paste for fine pitch QFN assembly without bridging
- What should be noted when soldering with lead-free solder wire?
- Troubleshooting inconsistent solder paste release from nano coated stencils
- How to select and handle solder paste for fine pitch SMT assembly
- Best practices for stencil printing with lead free solder paste
- Adjusting aperture design to improve solder paste release for 01005 components
- What Are the Solder Paste Manufacturers in Changzhou?
- Solder bridging between adjacent pins causing short circuits, key prevention for fine-pitch ICs
