How should purchased solder wire be managed and stored in general?

PurchasedSolder wireHow should it be managed and stored in general? In the current era, solder wire, as an indispensable solder material in the processing and production of the electronics industry, is needed by many manufacturers. They also need to pay attention to the quality of the product. So, how do we select the appropriate material? Below, JJY Solder Paste Manufacturer will introduce to you how to select this product for management and storage?

1It is necessary to consider the strength of the manufacturer, as many manufacturers are the most fundamental and crucial step. Secondly, when choosing after-sales service, pay attention to the manufacturers of these tin wires. Not only that, but also understand some information about the manufacturers, including their addresses and contact details.
2.It's about whether the scale of the gate manufacturer is large and whether all the relevant positions are well-equipped. Because large-scale and powerful manufacturers are all over several thousand square meters, they have their own core technologies, exhibition halls, related laser machine equipment, R&D departments, quality control departments and other complete supporting facilities, so customers do not have to worry about after-sales issues when purchasing facial recognition turnstiles.

Storage of purchased solder wire: The diameter of the purchased solder wireIQCAfter inspection, the procurement team leader will uniformly record and keep the accounts;Keep a copy of the incoming material documents in the warehouse for accounting purposes(The number of items and the weight must be indicated)(The personnel and positions managed by different factories may vary. The common storage process is for reference only.) The replacement of solder wire shafts and soldering heads is uniformly accounted for and kept by the warehouse. As the basis for the next use. The purchasing team leader and the warehouse will conduct an inventory check of solder wire, solder wire shafts, etc. once a month.

Storage of solder wire: There is flux added in the middle of the solder wire, which is called rosin in the industry. It mainly serves to assist in soldering. If it is not stored properly, its surface will oxidize. Once oxidized, it will affect the soldering effect. Therefore, it is recommended to purchase and use as much as needed, and it is better to buy again when it is almost used up. Generally, after purchasing solder wire,1The purchased solder wire should be used up within the year. When stored in the warehouse, it is necessary to ensure it is dry and well-ventilated. The ground should not be damp, which is also beneficial to the performance of the solder wire. It is best to place it on a dedicated shelf. On rainy and cloudy days, make sure to close the Windows

So from the above points, it can be seen that the production of this product is not scarce now. This is what the editor would like to introduce to you some small knowledge about the management and storage of solder wire. When purchasing solder wire products, it is recommended that customer factories must make a good demand plan, purchase reasonably, and find solder raw material manufacturers. Therefore, each should do their own products well and then sell them as a set. It all depends on who has a higher cost performance. The service is good.