What causes leakage of electricity in tin wire during the welding process and what are the solutions?

Generally, when working in this industry, it is necessary to avoid encountering this issue. Therefore, caution is the most important in this regard. Do not be careless. Any danger that exists should be treated well. Usually, there will not be just one problem; there may be multiple ones. It is necessary to carefully analyze the problem and solve it. Below, JJY solder Paste Manufacturer will explain the general situation to youTin wireThe causes and solutions of leakage in this aspect:

Generally, there are many reasons involved in this issue, such as whether the customer's welding process has been cleaned;PCBWhat is the distance between the solder joints on the board;The insulation resistance of the flux itself after soldering is related to the environment and other factors.

3The environment also has a certain influence, whenPCBAfter the board is welded, if it remains in a damp environment for a long time, it is also very likely that the flux residue will absorb moisture and cause leakage of electricity.

The above is an account of some factors that can cause leakage. The best way for everyone to prevent leakage during the operation process is toPCBIf the board is thoroughly cleaned, there will be no leakage of electricity. Also, it is necessary to choose high-quality and specific flux. If you still have any questions or want to learn more about soldering, lead-free solder wire and other related knowledge, please continue to follow the online message of JJY Solder Paste Factory to interact with us.