Could the solder paste manufacturer briefly discuss the correct usage of solder wire?

SpeakSolder wireI think everyone should be quite familiar with this. It is an indispensable auxiliary material in the electronics industry. Recently, many manufacturers have asked why some different usage concepts and methods occur during the production process, which leads to poor soldering effects on the products. Let the solder paste manufacturer explain the specific and correct usage methods:

1The soldering method must be correct. Using the correct soldering method not only saves time but also reduces the generation of tin dross.

2Solder joints made by soldering wires can only be used for conducting electricity and dissipating heat between parts and cannot serve as force support points.

3Try to wear gloves and a mask when working. Non-environmentally friendly soldering wires contain a relatively high amount of lead, and long-term exposure can have an impact on the body.

4The workplace should be in a well-ventilated area, as there will be solder and flux in the soldering wire, which will produce smoke during soldering. Maintaining good ventilation can effectively prevent excessive inhalation from affecting the body.

5Avoid touching the tip of the soldering iron. During soldering, the temperature of the soldering iron will reach300~400°It's very dangerous.

6Integrated circuits should be soldered later. The soldering iron should be reliably grounded or the residual heat should be utilized for soldering after power failure. Or use a dedicated socket for integrated circuits. After soldering the socket, insert the integrated circuits into it.

The above is what I have introduced to you all. You can take a look at it relatively. If you want to know more about soldering, welcome to interact and communicate with us!!