What small details should lead-free solder paste manufacturers pay attention to when using solder paste?

Lead-free solder pasteWhat small details should manufacturers pay attention to when using solder paste? For many solder paste manufacturers, in the era of information development, everyone has several electronic products. Lead-free solder paste is an essential product for the production of these electronic products. So, how do people use it? How can lead-free high-temperature solder paste be used to achieve better soldering results? Now, let JJY Factory explain it to everyone:

The application of solder paste,It is carried out in accordance with the guidance of "Storage and Application of Solder Paste". Then, what small key points should heavy metal-free solder paste manufacturers pay attention to when applying solder paste? Is there any method to follow?

Friends should pay attention to some small details of the solder paste produced by the heavy metal-free solder paste manufacturer, which can be respectively: heating time, mixing time, heavy metal-free and lead-containing, etc. What are the common situations of heavy metal-free solder paste? 

To prevent heavy metal-free solder paste from leaving the watch cover open for too long, after removing the solder paste, tightly close the inner cover of the solder paste. Do not take as much as you can. The reason is that when the solder paste is exposed and comes into contact with the gas, it is very easy to be oxidized. After removing the heavy metal-free solder paste, press the inner cover firmly to prevent the gas between the back cover and the inner cover from coming into contact with the solder paste. First, make sure the inner cover is tightly sealed, and then tighten the back cover.
For the on-duty staff, it is very likely that they will encounter the problem of solder paste being exposed to the air for a long time. How should they deal with it? 

The remaining solder paste should be stored in an empty can. Throughout this process, no external gases come into contact. It is impossible to put the remaining solder paste and the unused ones together. When applying solder paste, it is necessary to prevent the amount of solder paste used and be clear about how much is needed and how much is taken.

Want to know about solder pasteSolder pasteDear partners of low-temperature solder paste, solder wire and solder bar, welcome to consult Shenzhen JJY Industrial Technology Co., LTD. Let's learn and grow together!