In solder wire products, what is the amount of tin in low-temperature solder wire?

In the solder wire products used by each person, the amount of solder in the solder wire is10%and99.3%Between, thenLow-temperature tin wireWhat should be the amount of tin? Below, the tin wire manufacturer will explain it to you:

It is important to know in advance that low-temperature tin wires are generally divided into two types: leaded and lead-free. Perhaps no one has noticed that among the leaded tin wires currently used in the market, there are also some of the better ones63A certain degree of tin wire. Why?63The desoldering wire is not set65,67,69How about the degree??How could there be no ratio?63The degree is quite good. There's lead-tin wire now?Similar to 70 degrees, 75 degrees, 80 degrees, etc.

But the actual direct cause is like this.63High-quality tin wire is an excellent blend of lead and tin, with a relatively low melting point183℃. But there is no comparison.63The degree is also quite good. There are lead-tin wires with different degrees?Considering that the price of tin is much higher than that of lead,63The performance of the degree is already quite good. No matter how high the degree of the tin wire is, not only is the price expensive, but also the tin wire is not available63The performance of the degree is good

The tin content of low-temperature lead-free tin wire is42%Although the specific effect of low-temperature lead-free tin wire soldering is not particularly good, it is also because of its melting point138℃In many aspects of welding, it can effectively prevent unnecessary electronic components from being damaged due to excessive temperature. Because the solder joints of its soldering are relatively brittle, the most basic lead-free tin wire soldering is good, yet its melting point can still reach217℃. This is also non-exchangeable. In fact, it has no reference value.

To sum up, the content of tin wire does not determine the specific effect of welding. Only by choosing the right solder wire can it be considered better. After14Shenzhen JJY, in collaboration with tin raw material producers and a wide range of chemical raw material producers, has been dedicated to the research and development, production and customization of solder wires in the electronic soldering industry for many years. The products and services provided by Shenzhen JJY are excellent and have many successful cases. Relying on its overall strength, it has created a high-quality and trustworthy sales market.