Solder paste manufacturerHow is the price of low-temperature solder paste determined? When manufacturing mobile phones, it is necessary to design under what standards the product will be applied in the future and what the service life of the application will be. All these common faults during the service life period must be well planned or designed as a whole.

    Then, based on what is appliedSolder pasteThe raw materials and the main parameters of the process should be estimated and specified before conducting scientific research on product samples. At the same time, the design plan of the product should be analyzed, and problems and hidden shortcomings should be identified through experiments. This continuous process is carried out until the specified end of the designed product, and only then can the design be finalized.

    After the shaped product is designed, the production process gradually enters the research and development stage. At this point, it is necessary to select the process, materials and components according to the product design requirements for production, and conduct inspections on the characteristic parameters of the manufactured product.

    It can be seen from this that there have been adverse accidents caused by whisker problems in electronic devices such as cardiovascular stents and stamping engines. Therefore, the tin whisker problem becomes a key stability problem in the lead-free process. This is too.Lead-free solder wireAnd the key stability problems in the process of lead-free solder products.

    Shenzhen JJY Industrial Technology Co., LTDIt is a manufacturer that has been engaged in the research of solder paste, solder wire and wire, lead-free solder paste, and leaded solder paste for over ten years. It provides solder paste, solder wire, solder rods, lead-free solder paste, leaded solder paste, preformed soldering materials, and solder wire.