The use of solder paste,It is carried out in accordance with the guidelines of "Storage and Use of Solder Paste", thenLead-free solder paste manufacturerWhat small details should be noted when using solder paste? Are there any tricks to follow?

Partners should pay attention to being lead-freeSolder paste manufacturerSome minor details of solder paste can be respectively: the warming time, the stirring time, lead-free and leaded ones, etc.What are the common problems of lead-free solder paste? JJY solder Paste Manufacturer will tell you.

Lead-free solder pasteAvoid opening the lid for too long. After removing the solder paste, tightly close the inner lid of the solder paste. Don't take a little as needed. The reason is that the solder paste is exposed to the air and is prone to oxidation.After taking out the lead-free solder paste, press the inner cover tightly to prevent the air between the outer cover and the inner cover from coming into contact with the solder paste. First, make sure the inner cover is tightly sealed, and then tighten the outer cover.

For the on-duty staff, they may face the problem of solder paste being exposed to the air for a long time. How should they deal with it?

The remaining solder paste should be stored in an empty can, during which the outside air does not come into contact. The remaining solder paste and the unused ones cannot be stored together. When using solder paste, it is necessary to avoid excessive consumption of solder paste and take only as much as needed.

Shenzhen JJY Industrial Technology Co., Ltd. is a manufacturer that has been engaged in the research of solder paste, solder wire and wire, lead-free solder paste, and leaded solder paste for over ten years. It provides solder paste, solder wire, solder rods, lead-free solder paste, leaded solder paste, preformed soldering materials, and solder wire.